PRE Results Report
Publications

BIMCON

Journal Articles

Palos, S., Kiviniemi, A., Kuusisto, J. (2014) “Future perspectives on product data management in building information modeling”, Construction Innovation: Information, Process, Management, Vol. 14 Iss: 1, pp.52 – 68.http://www.emeraldinsight.com/journals.htm?issn=1471-4175&volume=14&issue=1&articleid=17101450

S. Zhang, K. Sulankivi, M. Kiviniemi, I. Romo, C.M. Eastman, J. Teizer. BIM-based Fall Hazard Identification and Prevention in Construction Planning. . Journal article, Safety Science 01/2014.

Häkkinen, T., Kuittinen, M., Ruuska, A., Nusrat, J. 2014 Modular Carbon Assessment for Buildings Prepared for Journal: Architectural Engineering and Design Management

Conference Papers

Olsson, T.D., Savisalo, A.T., Hakkarainen, M. & Woodward, C. User evaluation of mobile augmented reality in architectural planning. Conference article at ECPPM2012.  http://bit.ly/1sOOXr8

Sulankivi, K., Tauriainen, M., Kiviniemi, M. (2014). Safety aspect in constructability analysis with BIM. Proceedings of CIB W099 International Conference Achieving Sustainable Construction Health and Safety, Lund, Sweden, 2 – 3 June 2014. Lund University, Sweden. P. 586 – 596.

Sulankivi, K., Zhang, S., Teizer, J., Eastman, C. M., Kiviniemi, M., Romo, I., Granholm, L. (2013). Utilization of BIM-based Automated Safety Checking in Construction PlanningIn CIB publication 388: Proceedings of Safety and Health in Construction. CIB World Building Congres, Brisbane May 2013.

Sulankivi, K. (2014). BIM promoting construction site safety: Industry examples. Innovation Reports on Buildings and the Built Environment for Planning, Design, Engineering, Construction, Manufacturing, Management, Maintenance, Use and Deconstruction. CIB Innovation webinar May 7, 2014: Using BIM to Enhance Construction Safety and Health. International Council for Research and Innovation in Building and Construction (CIB). Available on-line: http://www.cibworld.nl/site/innovation.html

Jussila, Ari; Kiviniemi, Markku; Talvitie, U. (2012). Piloting a new information sharing method in a construction supply chain. eWork and eBusiness in Architecture, Engineering and Construction. Proceedings of the European Conference onProduct and Process Modelling 2012 , ECPPM 2012, ss. 707 – 712. European Conference on Product and Process Modelling, ECPPM 2012, Reykjavik, 25 – 27 July 2012. doi:978-041562128-1

Palos, S. State of the art analysis of product data definitions usage in BIM. eWork and eBusiness in Architecture, Engineering and Construction ECPPM 2012. ISBN: 978-0-415-62128-1

Tauriainen, M. & Mero A-K. & Lemström A. & Puttonen J. & Saari, A. 2012. The development of constructability using BIM as an intensifying technology. In Gudnason & Scherer (Eds), eWork and eBusiness in Architecture, Engineering and Construction, p. 713-716.

Master's Theses

Lemström, A. 2012. Improving the constructability of the framework in residential buildings by utilizing building information modeling. Master’s Thesis (In Finnish). Aalto University. Department of Civil and Structural Engineering.

Forsblom, Kati. 2013. Assessment of buildability during architectural and building services design. Master’s Thesis (In Finnish). Aalto University.

Laakso, P. 2012. Methods for measuring and developing buildability in a building information model -based environment. Master’s Thesis (In Finnish). Aalto University, Department of Civil and Structural Engineering.

Mero, Anna-Kaisa. 2012. Buildable design and its appraisal by the building information modeling. Master’s Thesis (In Finnish). Aalto University.

Nissilä, J. 2013. Development of the BIM-based supply chain management of precast concrete elements. Master’s Thesis (In English), University of Oulu.

Raikaa, M. 2011. Requirements of BIM software for work safety planning on construction site. Master’s Thesis (In Finnish). Aalto University, Department of Civil and Structural Engineering.

Sironen, A. 2014. Rakennesuunnittelijan tuottaman tietomallin BEC-määräluetteloiden luotettavuus betonielementtirakennuksen tarjousvaiheen määrälaskennassa. Diplomityö. Aalto-yliopisto, Rakennetekniikka.

Bolpagni, M. (2013). The implementation of BIM within the public procurement. A model-based approach for the construction industry. Master’s Thesis (In English), Università degli Studi di Brescia (University of Brescia, Italy).

Reports

Bolpagni, M. (2013). The implementation of BIM within the public procurement. A model-based approach for the construction industry. VTT Technology report: 130 ISBN ISBN 978-951-38-8058-3. http://www.vtt.fi/vtt_show_record.jsp?target=julk&form=sdefe&search=71022

Sulankivi, K. in cooperation with Parma, Skanska, Finnmap and Tekla. Betonielementtien BIM-pohjainen tuoteosakauppa, Case väliseinäelementit. VTT Research report (Tutkimusraportti VTT-R-03335-13), In Finnish

Vares, S., Sulankivi, K., Palos, S., Kojima, J., Kiviniemi, M., Tuomisto, M. (2013). Tuotetiedon käyttö tietomallinnuksessa esimerkkinä ympäristövaikutusten laskenta. VTT Tutkimusraportti : VTT-R-01180-13, 75 s. + liitteet 2 s.

Vares, S., Häkkinen, T., Sulankivi, K. (2014). Tietomallipohjainen ympäristövaikutuslaskenta. (Not published yet)